Check engine and equipment before each operation for loose nuts, bolts and attachments keep these items tightened. Be sure fuel valve, if present (see equipment manufacturer’s instructions) is open. Be sure ignition switch on engine or equipment is in “ON”, “RUN” or “START” position. Screw oil fill cap/plug back into oil fill hole. Add oil to overflow point, making sure to avoid spilling. Screw oil fill cap/dipstick back into oil filler tube. Afterward, continue reading instructions below. If oil reading on dipstick is below “ADD” mark, slowly add oil to reach “FULL” level. Unscrew and remove oil fill cap/dipstick from oil filler tube. Unscrew oil fill cap/dipstick from oil filler tube and wipe dipstick clean. Adult Supervision of Operation, Refueling and Maintenance 060 means March 1 unless it's a leap year, in which case 060 means February 29. The last month you added is the month of manufacture and the remainder is the day of the month. Begin adding the number of days in each month, 31 for January, 28 or 29 for February, 31 for March, and so on, until you reach a total just below the three-digit number. Use the final three digits to calculate the day of manufacture, since they indicate the day, starting at 001 for January 1 and counting up to the end of the year. If there are five numbers, the engine was built in or after 2004 and the first two digits are the last two digits of the year, for example. For example, 2 means the engine was built in 1982, 1992 or any year before 2004 that ends in two. If there are four numbers, the engine was built before 2004 and the first digit is the last digit of the year. Use the first one or two numbers to estimate the year of the engine. Each Tecumseh engine has a date-of-manufacture code included with the model number that shows the day and year the engine was built-though for engines made before 2004, you still need to estimate the decade.You'll find Tecumseh small engines powering lawn mowers, string trimmers, riding mowers, chain saws, snow blowers and other outdoor tools.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |